How To Repair a Bent Garage Door

How to repair a bent garage door? If your garage door has been damaged and is now bent, you might be worried about how to repair it.

A bent garage door not only looks unsightly but can also affect the performance of the door. However, you don’t necessarily need to call a professional for this job.

With the right tools and a little bit of patience, you can repair a bent garage door yourself. In this article, we will walk you through the steps required to fix a bent garage door.

Garage doors are an important part of our homes, and we rely on them to provide security and protect our vehicles. However, they can become damaged due to various reasons, such as accidental impact, extreme weather, or wear and tear.

One of the most common types of damage to garage doors is bending, which can cause the door to become misaligned or stuck. While you may be tempted to call a professional to fix the problem, you can often repair a bent garage door yourself with the right tools and knowledge.

Tools Required

To repair a bent garage door, you will need the following tools:

  • Protective gloves and eyewear
  • A pry bar
  • A rubber mallet
  • A pair of pliers
  • A hammer
  • A level
  • A drill
  • Screws
  • Replacement panels (if necessary)

So How To Repair a Bent Garage Door?

Step 1: Identify the Damage

The first step in repairing a bent garage door is to identify the extent of the damage. Inspect the door carefully and look for any visible dents or bends.

Check the alignment of the door to see if it is still level. If the damage is minor, you may be able to fix it by simply straightening the affected area. However, if the damage is severe or affects multiple panels, you may need to replace the damaged parts.

Step 2: Remove the Damaged Panel

If the damage is limited to one panel, you can remove it and repair it separately. Start by releasing the tension on the garage door springs to prevent any accidents. Use a pry bar to remove the damaged panel from the track, then set it aside.

Step 3: Straighten the Panel

Once you have removed the damaged panel, you can start straightening it. Put on your protective gloves and eyewear, and use a rubber mallet to gently tap the panel back into shape.

Use a pair of pliers to bend any protruding metal back into place. Check the panel for any remaining dents or bends, and use a hammer to remove them. Use a level to ensure that the panel is straight and even.

Step 4: Reinstall the Panel

common garage door problems
common garage door problems

Once the panel is straightened, you can reinstall it. Use a drill to reattach the panel to the track using screws. Make sure that the panel is securely fastened, and that it is level with the other panels. Repeat this process for any other damaged panels.

Step 5: Test the Door

Once you have reinstalled the panels, it’s time to test the garage door. Use the remote control or the wall switch to open and close the door.

Check that it moves smoothly and quietly and that it is level and aligned with the opening. If there are any issues, you may need to make further adjustments or call a professional garage door repair company.

Step 6: Prevent Future Damage

To prevent future damage to your garage door, there are a few things you can do. Firstly, make sure that you keep the area around the door clear and free from obstacles.

This will prevent accidental impact or damage from debris. Secondly, ensure that the door is well-maintained by lubricating the moving parts and cleaning it regularly. Finally, consider installing a garage door protector or bumper to absorb any impact and prevent damage.


A bent garage door can be a frustrating problem, but it doesn’t have to be a difficult one to fix. By following the steps outlined in this article, you can repair a bent garage door yourself, saving you time and money. Remember to take your time, use the right tools, and always put safety first. With a little bit of effort, your garage door will be back to its best in no time.

Need professional garage door repairs in Englewood FL? Call Majestic Garage Door today!


Can I repair a bent garage door myself?

Yes, you can repair a bent garage door yourself with the right tools and knowledge. However, if you are unsure or if the damage is severe, it’s always best to call a professional.

How can I prevent my garage door from becoming bent?

To prevent your garage door from becoming bent, keep the area around it clear, maintain it regularly, and consider installing a garage door protector or bumper.

What tools do I need to repair a bent garage door?

You will need protective gloves and eyewear, a pry bar, a rubber mallet, pliers, a hammer, a level, a drill, screws, and replacement panels (if necessary).

How long does it take to repair a bent garage door?

The time it takes to repair a bent garage door depends on the extent of the damage and your level of experience. It can take anywhere from a few hours to a full day.

Can a bent garage door affect its performance?

Yes, a bent garage door can affect its performance by causing it to become misaligned, stuck, or noisy. It can also reduce the overall security and insulation of your garage.

Rate this post
Table Of Content
Articles That May Interest You: